STARTING YOUR HARLEY DAVIDSON WITHOUT YOUR KEY FOB
- Turn the key to IGNITION. Immediately press and hold both turn signal switches until FIVE dashes appear in the odometer gauge. You now have 12 seconds to enter the first number:
- Select the first digit of your PIN (a) by pressing the left turn signal button (a) times.
When the correct number appears in the first position on the odometer… - Press the right turn signal switch one time to move to the next digit.
- Select the second digit of your PIN (b) by pressing the left turn signal switch (b) times.
- Click the right turn signal button one time to move to the next digit.
- Select the third digit of your PIN (c) by pressing the left turn signal switch (c) times.
- Press the right turn signal switch one time to move to the next digit.
- Select the fourth digit of your PIN (d) by pressing the left turn signal switch (d) times.
- Press the right turn signal switch one time to move to the next PIN digit.
- Select the fifth digit of your PIN (e) by pressing the left turn signal switch (e) times.
- Press the right turn signal switch one time to advance to the next digit.
- Press the right turn signal switch once. The security system alarm is now off.
If You Do Not Have Your Pin
Before something happens to your Fob on the road, either find your PIN code and save it someplace safe, or, with the working Fob present, assign a new PIN Code you will remember to the bike. Use the instructions below. If you have your Fob but the bike won’t disarm with it present, you may need to replace the CR2032 Battery inside the Fob. These are available at most stores. If you are reading this because you lost or damaged your Fob and did not assign a PIN Number, some dealers use a default PIN Number such as 12345 or the last 5 of the VIN. If that’s not the case and you don’t know the PIN, you’re screwed.
Setting Your Harley Davidson Alarm Override PIN
- Choose a five digit code (with each digit being 1-9) Keep this somewhere safe!
- With your assigned Fob present, turn ignition key ON – OFF – ON – OFF – ON
- Press left turn signal switch two times
- Press right turn signal switch one time, then release.
* Both turn signals will flash three times. The current PIN will appear on the odometer screen. The first digit should be blinking. - Select the first digit (a) of the NEW PIN by pressing the left turn signal switch (a) times
- Press the right turn signal switch one time and release. The new digit (a) will replace the current number in the odometer window, and you will advance to the next digit.
- Select the second digit (b) of your NEW PIN by pressing the left turn signal switch (b) times.
- Press right turn signal switch one time and release. The new digit (b) will replace the current in the odometer window, and you will advance to the next digit.
- Select the third digit of your PIN (c) by pressing the left turn signal switch (c) times.
- Press the right turn signal switch one time and release. The new digit (c) will replace the current number in the odometer window, and you will advance to the next digit.
- Select the fourth digit of your PIN (d) by pressing the left turn signal switch (d) times.
- Press the right turn signal switch one time and release. The new digit (d) will replace the current number in the odometer window, and you will advance to the next digit.
- Select the fifth digit of your PIN (e) by pressing the left turn signal switch (e) times. The new digit (e) will appear on the odometer screen.
- Press the right turn signal switch one time to move to the next digit.
- Press the right turn signal switch one more time to turn off the security system alarm. The odometer will return to mileage display
*Turn OFF the ignition. Your NEW PIN is set.
