Thank you for visiting Bikes Built Better’s Tech Discussion Forum
Do Not Post Here For Support
Use Contact Form For Fast Customer Support
Forum Registration has been disabled due to spamming the board. Previously registered users have been saved and information is safe and secure. We left the forums open to browse but have deleted many of the posts that had been compromised. We will post new tech information here in the future but if you have a question or need service please use our
Contact Form Located Here.
Do Not Post Here For Support
Use Contact Form For Fast Customer Support
Forum Registration has been disabled due to spamming the board. Previously registered users have been saved and information is safe and secure. We left the forums open to browse but have deleted many of the posts that had been compromised. We will post new tech information here in the future but if you have a question or need service please use our
Contact Form Located Here.
Wire Color Code Honda Turn and Brake Tach
Wire Color Code Honda Turn and Brake Tach
Here is some guides to use on most Honda Motorcycle Models. Some Models May Vary So always double check before modify.
Left Turn Signal ................ Orange
Right Turn Signal .............. Light Blue
Running Light ................... Brown
Brake Light ...................... Green w/Yellow Stripe
Ground ............................ Green
Some Models with integrated front running lights will use orandge w/white stripe for left front and light blue w/white stripe right front these are controlled through the turn signal control and some mods will require this be disabled.
Other helpful wires Tach for VTX 1800 Yellow w/Blue Stripe located in head lamp bucket but this will only signal pulse from Rear Cylinder The front Cylinder tach wire can be located at the coil and is Blue w/yellow Stripe but for most aftermarket Tachometers you will need to use a tach adapter. I suggest The Crane Tach Adapter You can find them Here
Left Turn Signal ................ Orange
Right Turn Signal .............. Light Blue
Running Light ................... Brown
Brake Light ...................... Green w/Yellow Stripe
Ground ............................ Green
Some Models with integrated front running lights will use orandge w/white stripe for left front and light blue w/white stripe right front these are controlled through the turn signal control and some mods will require this be disabled.
Other helpful wires Tach for VTX 1800 Yellow w/Blue Stripe located in head lamp bucket but this will only signal pulse from Rear Cylinder The front Cylinder tach wire can be located at the coil and is Blue w/yellow Stripe but for most aftermarket Tachometers you will need to use a tach adapter. I suggest The Crane Tach Adapter You can find them Here
Chuck
Live every day like its your last and one day it will be!
Live every day like its your last and one day it will be!