Thank you for visiting Bikes Built Better’s Tech Discussion Forum

Do Not Post Here For Support

Use Contact Form For Fast Customer Support

Forum Registration has been disabled for now due to the huge amount of Trolls spamming the board with B.S. Previously registered users have been saved and information is safe and secure. We left the forums open to browse but have deleted many of the posts that had been compromised. We will continue to post information here as It becomes available but if you have a question or need service please use our
Contact Form Located Here.

Wire Color Code Honda Turn and Brake Tach

Information and Links For Honda Motorcycles
Post Reply
Chuck
Site Admin
Posts: 29
Joined: Thu Oct 18, 2007 6:18 pm
Contact:

Wire Color Code Honda Turn and Brake Tach

Post by Chuck » Thu Nov 06, 2008 3:50 pm

Here is some guides to use on most Honda Motorcycle Models. Some Models May Vary So always double check before modify.

Left Turn Signal ................ Orange
Right Turn Signal .............. Light Blue
Running Light ................... Brown
Brake Light ...................... Green w/Yellow Stripe
Ground ............................ Green

Some Models with integrated front running lights will use orandge w/white stripe for left front and light blue w/white stripe right front these are controlled through the turn signal control and some mods will require this be disabled.

Other helpful wires Tach for VTX 1800 Yellow w/Blue Stripe located in head lamp bucket but this will only signal pulse from Rear Cylinder The front Cylinder tach wire can be located at the coil and is Blue w/yellow Stripe but for most aftermarket Tachometers you will need to use a tach adapter. I suggest The Crane Tach Adapter You can find them Here
Chuck
Live every day like its your last and one day it will be!

Post Reply